How To Make Your Own Walking Stick

… In 10 Easy Steps

making walking stick
Handcrafting a walking stick.

This is a “mail bag” question that we get all the time. The good news is, to make a basic walking stick by hand is not really a big deal. A monkey could do it.

What you’ll need:

– 80 grit sandpaper
– 220 grit sandpaper
– A small saw
Lacquer
Rubber ferrule

As far as crafting the walking stick, here’s the most simple and direct method:

1) First off you’ll want to pick a nice piece of wood, preferably a straight sapling that’s roughly 1.2″ in diameter at the grip.

2) Cut the sapling to your preferred size. At this point, you should also cut off any twigs and protrusions.

3) Set the sapling aside for several months to make sure it’s nice and dry. If you live in a hot climate, the sapling will dry out a lot faster. (If you’re working with “wet” wood, there’s a chance that the stick will bow at some point, especially if it’s leaned against a wall.) If you happen to have access to a kiln, you can dry the sapling much faster.

4) If the bark is flaky or too thick, use the more coarse 80 grit sandpaper to gently sand the shaft by hand, working in an up and down motion.

5) Use 80 grit sandpaper to shape the top of the walking stick. If you’re going for the graceful, Brazos-Walking-Sticks-esque look, you’ll need to put quite a bit of work into this part in order to get it nice and rounded. 🙂

6) After the walking stick is sanded with 80 grit, finish it off with 220 grit. The 220 is a finer sandpaper and will give the stick a nice, finished, smooth feel.

7) At this point, clean the walking stick, making sure that all of the dust from the sanding process is removed. You can use a damp cloth, but make sure the walking stick is completely dry before proceeding to the next step.

8) Gently spray the walking stick with a clear lacquer. You can buy a can of clear lacquer at any hardware store. When spraying lacquer, the key is to give it a nice, smooth, sweeping motion, while not staying stuck on any one area (or else the lacquer will build up in that one area).

9) OPTIONAL: Drill a 3/8″ hole approximately 4″ from the top of the stick. Insert a leather strap or string.

10) Insert your rubber ferrule on the end of your walking stick and then enjoy your creation!

hickory walking stick
A Handcrafted Hickory Brazos Walking Stick

Just don’t try and sell more of these than we do. 🙂

Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>